How long does a metal roof last?

A properly installed metal roof typically lasts 40 to 70 years depending on the material and profile. Standing seam steel and aluminum roofs in East Texas regularly reach 50 years with minimal maintenance. For comparison, asphalt shingles typically last 15 to 25 years, which means a metal roof will likely outlast two or three shingle replacements over the same period.

How much does a metal roof cost in East Texas?

Metal roofing in East Texas typically runs $6,000 to $30,000 or more depending on roof size, profile, and material. An exposed-fastener R-Panel roof on a standard 1,500-square-foot home typically runs $6,000 to $12,000. A standing seam system on the same home typically runs $12,000 to $22,000. Redline provides free written estimates after an on-site measurement and assessment.

What is the difference between standing seam and exposed fastener metal roofing?

Standing seam metal roofing uses concealed clips to attach panels to the roof deck, with no fasteners penetrating the roof surface. This eliminates the most common metal roof leak point and allows for thermal expansion without stress on the panels. Exposed fastener systems (R-Panel, corrugated) use screws driven through the metal surface and are less expensive but require periodic fastener inspection because the rubber washers under the screws can deteriorate over time. Standing seam is the premium residential option; exposed fastener is common on agricultural and commercial buildings.

Is metal roofing loud during rain or hail?

Metal roofing installed over solid decking with proper insulation is not significantly louder than asphalt shingles. The rain-on-metal sound is primarily associated with older pole barn or agricultural installations where metal panels are installed directly over open framing with no decking underneath. Residential metal roofs installed over solid sheathing and underlayment perform comparably to shingle roofs in rain conditions.

Can I put a metal roof over my existing shingles?

In some cases, yes. Texas building code allows a second layer over an existing single layer of shingles if the decking is in sound condition and the structure can support the added weight. Installing metal over shingles eliminates tear-off costs but prevents inspection of the decking. Redline evaluates the existing roof on a case-by-case basis and recommends tear-off when there is any evidence of decking damage, moisture, or soft spots.

Does metal roofing help with insurance premiums in Texas?

In many cases, yes. Metal roofing typically carries a Class A fire resistance rating and high wind resistance ratings. Some Texas insurers offer premium discounts for impact-resistant or metal roofing. Check with your specific carrier, as policies vary. Redline can provide the product specifications and installation documentation your carrier may require.

How do you maintain a metal roof in East Texas?

Metal roofs require minimal maintenance but benefit from an annual inspection. Key items: check panel seams and fasteners (exposed fastener systems need screw replacement every 8 to 12 years as rubber washers deteriorate), clean debris from valleys and gutters, trim overhanging branches, and inspect flashing at penetrations and walls. Scratches in coated panels should be touched up with matching paint to prevent corrosion at the exposed area.

Do you repair metal roofs, or only install new ones?

We do both. Redline repairs all types of metal roofing including standing seam, exposed fastener, and metal shingle systems. Common repairs include seam re-welding, fastener replacement, panel replacement after impact damage, flashing repair at penetrations and walls, and recoating of older coated panels. We also perform metal roof inspections for maintenance and insurance purposes.

Does metal roofing qualify for insurance premium discounts in Texas?

In many cases, yes. Metal roofing typically carries a Class 4 impact resistance rating and a Class A fire resistance rating - the highest ratings available. Many Texas insurance carriers offer premium discounts for Class 4 impact-resistant roofing, which includes most metal roofing systems. Discount amounts vary by carrier and policy, typically ranging from 15 to 28 percent. Redline can provide the product specifications and installation documentation your carrier requires to apply the discount. Check with your specific carrier before assuming the discount applies.

What is the best time of year to install a metal roof in East Texas?

Metal roofing can be installed year-round in East Texas. Unlike asphalt shingles, which require a minimum temperature for the self-sealing adhesive to activate, metal panels do not have temperature-dependent installation requirements. Fall and winter are often good windows because temperatures are comfortable for crews and scheduling is typically more flexible than in the summer post-storm season. The main restriction for any roofing project is avoiding active rain - not the season.

Metal Roofing Contractor in Tyler, TX

Quick answer: Metal roofing in East Texas typically costs $6,000 to $22,000 installed depending on profile and material. It lasts 40 to 70 years with minimal maintenance. Redline provides free on-site estimates - call (903) 437-7049.

Metal roofing is the installation of steel, aluminum, copper, or zinc panels or shingles on a residential or commercial structure, offering a lifespan of 40 to 70 years or more, superior wind and fire resistance, and lower long-term maintenance costs compared to asphalt shingles. Redline Roofing installs, repairs, and replaces residential and commercial metal roofs across East Texas, using our own trained crews on every project. We install standing seam, exposed fastener, and metal panel systems for homes, commercial buildings, agricultural structures, and multi-family properties.

How metal roofing installation works

Free on-site estimate. We measure the roof, assess the decking condition, and discuss material and profile options based on your building, budget, and aesthetic goals.
Material selection. We review standing seam vs. exposed fastener options, gauge and finish choices, and color selection. We order directly from the manufacturer to your specifications.
Existing roof assessment. We inspect the decking and determine whether tear-off is required. Damaged decking is replaced before any new material is installed.
Installation. Underlayment is installed, then the metal panels or shingles in the correct sequence per manufacturer specifications. All flashings at walls, penetrations, ridges, and valleys are installed as part of every job.
Fastener and seam inspection. On standing seam systems, all clips and seams are inspected before the job is closed. On exposed fastener systems, we verify every screw has a properly seated rubber washer.
Cleanup and walkthrough. All debris and metal cuttings are removed, and we walk the completed job with you before leaving.

Metal roofing cost in East Texas

Metal roofing costs in East Texas vary based on roof size, profile, and material grade. Typical ranges:

Exposed fastener R-Panel or corrugated (most economical): $4 to $7 per square foot installed, $6,000 to $14,000 for a typical residential roof
Standing seam steel (premium residential and commercial): $8 to $14 per square foot installed, $12,000 to $22,000 for a typical residential roof
Standing seam aluminum (coastal or high-corrosion environments): $10 to $16+ per square foot installed

A standard standing seam installation on a 1,500-square-foot home typically runs around $12,000 with mid-grade 26-gauge Galvalume panels. Size, pitch, complexity, and panel profile all affect the final number. Redline provides free written estimates after an on-site measurement.

Metal roofing systems we install

| Feature | Standing Seam | Exposed Fastener (R-Panel) | |---|---|---| | Fastener exposure | Concealed - no screws penetrate the surface | Screws visible through panel surface | | Leak risk | Very low - no fastener penetrations | Low to moderate - rubber washers wear over 8–12 years | | Cost (installed) | $12–$18 per sq ft | $5–$8 per sq ft | | Lifespan | 40–70 years | 30–40 years | | Thermal expansion | Floating clip system accommodates movement | Less flex - screws may loosen over time | | Best for | Premium residential, commercial | Agricultural, shops, budget residential | | Maintenance | Minimal - inspect seams and flashing annually | Replace fasteners every 8–12 years |

Standing seam. Panels with concealed fasteners and raised seams. No fasteners penetrate the roof surface, which eliminates the most common metal roof leak point and allows for thermal expansion. The standard for quality residential metal roofing in East Texas.

Exposed fastener (R-Panel, corrugated). More economical than standing seam. Common on agricultural buildings, shops, commercial structures, and budget-conscious residential projects. Requires periodic fastener maintenance as rubber washers wear over time - typically every 8 to 12 years in East Texas conditions.

Metal shingles. Individual shingle-style metal panels that give the appearance of traditional shingles or slate with metal durability. Used when a more traditional roofline aesthetic is desired.

All three systems are available in our full range of ETAS panel colors. Browse the metal colors to see them before your estimate, and ask us for physical swatches.

Why metal roofing performs well in East Texas

East Texas roofs face summer temperatures exceeding 100 degrees, spring and fall hail seasons, and periodic high-wind events. Metal roofing addresses each:

Heat. Reflective coatings reduce heat absorption compared to dark asphalt shingles, contributing to lower cooling costs.
Hail. Metal roofing is substantially more resistant to hail damage than asphalt shingles. Most metal roofs carry a Class 4 impact resistance rating, the highest available.
Wind. Metal roofing is rated to withstand winds of 140 mph and higher depending on the system, far exceeding typical asphalt shingle wind ratings of 60 to 110 mph.
Fire. Metal roofing carries a Class A fire resistance rating.
Longevity. A 40 to 70 year lifespan means a metal roof installed today will likely outlast two or three shingle roof cycles, reducing total long-term roofing cost.

Metal roof repair

Redline repairs all types of metal roofing systems. Common repairs include:

Fastener replacement on exposed fastener systems (rubber washers deteriorate over 8 to 12 years)
Panel replacement after impact or storm damage
Seam re-welding on standing seam systems
Flashing repair at penetrations, walls, and ridges
Recoating of older panels where the factory finish has degraded

Metal Roofing in Tyler, TX and East Texas

Tyler and Smith County represent one of the strongest metal roofing markets in East Texas. The combination of an active residential real estate market, a significant commercial and industrial property base, and above-average severe weather exposure makes the long-term value proposition of metal roofing compelling for a broad range of Tyler property owners.

Redline Roofing and Construction is a certified metal roofing installer serving the Tyler metro and all of East Texas. We hold installer certifications for Double-Lok, BattenLok, SuperLok, Lokseam, and Craftsman HB standing seam systems, as well as R-Panel and structural panel systems for commercial and agricultural applications. For Tyler-specific metal roofing information, see our dedicated Tyler, TX metal roofing page.

Why Metal Roofing Performs Well in Smith County’s Climate

Smith County’s climate creates the conditions where metal roofing’s performance advantages are most measurable. Three specific factors matter:

Hail resistance: The FEMA National Risk Index places Smith County at the 65th national percentile for hail exposure. Standard asphalt shingles develop granule loss and mat bruising from hail impacts that are not immediately visible but significantly shorten remaining service life. Standing seam metal roofing withstands hail events that would cause functional damage to asphalt shingles, and does not experience the granule adhesion loss mechanism that drives accelerated aging on shingle roofs after hail.

Solar heat reflection: Smith County’s FEMA flood score sits at the 85th national percentile and the county experiences one of the longer summer seasons in Texas. Bare steel and aluminum metal roofing reflects a significant portion of solar radiation rather than absorbing it, which measurably reduces attic temperatures and cooling loads compared to asphalt shingles. This difference shows up in utility bills across the long East Texas summer.

Longevity in a high-rainfall environment: With approximately 46 inches of annual rainfall, East Texas roofing systems handle significantly more water volume than national average. Metal roofing’s sealed seam design, when properly installed, provides waterproofing performance that does not degrade with age the way shingle granule adhesion does.

Tyler Commercial Metal Roofing

Standing seam and structural metal roofing systems are the dominant specification for warehouses, distribution facilities, and industrial properties in Tyler’s commercial corridors along US-69, Loop 49, and the industrial areas of eastern and southern Smith County. R-Panel and standing seam metal systems provide decades of reliable service on these building types with maintenance requirements significantly lower than membrane roofing alternatives.

For commercial metal roofing in Tyler and Smith County, see our commercial roofing page and our Tyler commercial roofing blog for more on commercial system selection and what the project process involves.

Where we serve

Redline Roofing installs and repairs metal roofing across Tyler and East Texas, from residential standing seam in neighborhoods like the Azalea District, Hollytree, The Woods, and Cumberland to agricultural, shop, and barndominium roofs on rural properties around Bullard, Flint, and Lindale. We cover every Tyler zip code, including 75701, 75703, 75707, and 75709, and serve the metal-roof-heavy workshop and barndominium market throughout Smith, Gregg, and Van Zandt counties. Homeowners near landmarks like UT Tyler, the Tyler Rose Garden, the Loop 323 corridor, and The Village at Cumberland Park call us for metal roof installation, repair, and storm-damage replacement.

Beyond Tyler, we provide metal roofing services throughout East Texas, including Longview, Kilgore, Lindale, Whitehouse, Bullard, Jacksonville, Henderson, Nacogdoches, Palestine, Athens, Canton, Mineola, Quitman, Winnsboro, Mount Pleasant, Sulphur Springs, Pittsburg, Gilmer, Gladewater, and Hallsville. Call (903) 437-7049 to get started.

Credentials

Redline Roofing and Construction LLC is fully licensed, bonded, and insured in Texas. We carry general liability coverage and workers compensation on every crew. All installations are completed by Redline employees, not subcontractors. We hold an A+ rating with the Better Business Bureau.

Project gallery

New standing seam metal roof installed on Tyler, TX home by Redline Roofing — Standing seam metal roof installation, Tyler TX, January 2023. 26-gauge Galvalume panels in Charcoal. Full tear-off, new decking in three sections. Installation completed in two days; expected lifespan of 50-plus years eliminates future shingle replacement cycles.

Residential metal panel roof replacement completed in Tyler, TX — Metal panel roof replacement, Tyler TX, January 2023. Exposed-fastener panels in Light Stone over a single-story residential home. Job completed in one day; crew cleared all metal cuttings and debris from the property before leaving.

Metal roof repair completed by Redline Roofing in East Texas — Metal roof repair, East Texas, December 2023. Replaced failed fasteners and resealed flashing at two chimney penetrations on an exposed-fastener system. Leaks at both penetrations stopped; contractor confirmed roof has an estimated 10 additional years of service life without full replacement.

What our customers say

"We went with standing seam metal after our third shingle replacement in 20 years. Redline measured everything precisely, gave us a detailed written quote, and finished the installation in two days. The crew was clean and professional. Two years in and the roof looks exactly the same as day one."
David P., Tyler TX, February 2023

"Had an older exposed-fastener metal roof on our shop that was leaking at several points. Redline came out, identified which fasteners had failed, replaced them, and resealed the flashing. Honest assessment - they told me the roof had another 10 years in it without a full replacement. That's the kind of contractor I'll call back every time."
Gary T., Longview TX, August 2023

"Redline installed a standing seam metal roof on our home after hail took out the shingles. They handled the insurance documentation and the installation was clean from start to finish. The crew left the yard cleaner than they found it."
Michelle R., Kilgore TX, April 2024

Metal Roofing by City

Metal roofing in Tyler, TX, including commercial metal systems across Smith County

Schedule a free metal roofing estimate

Call Redline Roofing at (903) 437-7049 or submit the form on this page to schedule a free on-site measurement and estimate. We are available seven days a week throughout East Texas.

Redline Roofing & Construction LLC has been serving homeowners and businesses across East Texas for 20+ years. We work in Tyler, Longview, Kilgore, and the surrounding areas, handling everything from minor repairs to full roof replacements on both residential and commercial properties.

We use durable, high-quality materials on every job, and our crews are skilled, certified, and held to a consistent standard of safety and workmanship. Whether you're dealing with a slow leak, storm damage, or a roof that's simply reached the end of its life, we'll give you a clear picture of what needs to happen and get it done right.

We carry an A+ rating from the Better Business Bureau, and most of our work comes from repeat customers and referrals. If you need a free estimate, a roof inspection, or a fast response to an emergency, give us a call. We'll be straight with you about what your roof needs and what it will cost.